Our
Complete Catalog section is now available for download
as a PDF file.
Download
Pedestal Autopsy Tables
Download
Necropsy Tables
Model 1036-41 PEDESTAL AUTOPSY TABLE
Model 1036-45 ELEVATING PEDESTAL AUTOPSY
TABLE
STANDARD FEATURES:
- Vertical height adjustment via
hydraulic
mechanical actuator
- Elevates from 32" to 38" high
(1036-41 non-elevating)
- All stainless steel construction
- Heliarc-welded seams and joints, ground and
polished to match adjoining surfaces
- Radii on all inside and outside corners for
easy cleaning
- Hydro-Aspirator with cold water control
valve and vacuum breaker
- Spray Hose Assembly with cold water control
valve, nozzle, 10 feet of flexible hose and vacuum breaker
- Mixing Faucet with gooseneck spout and wrist
blade handles
- Heavy-duty 1/2hp commercial disposal with
switch
- Large single compartment sink basin, 14 in.
x 12 in. x 8 in. deep
- Rapid and positive drainage
- Removable Access Panel
- Waterproof GFCI Electrical Outlet
- Plumbing and Electrical lines factory
installed
OPTIONAL FEATURES:
- Post Mortem Scale with Scale Pole
- Double-Cone Down Draft Ventilation Assembly
- Table Rinse with cold water control valve
and vacuum breaker
- Gas / Air Cocks
- Stainless Steel Body Supports
- Centimeter or inch markings
- Over-the-body Dissecting Tray
- Headrest
[RETURN TO TOP]
Model 1036-19 "L" SHAPED
AUTOPSY TABLE
STANDARD FEATURES:
- Autopsy area is 30" Wide x 102"L
- Dissecting area is 30" Wide x 60"
Long
- All Type 304 stainless steel construction
with a polished No. 4 Finish
- Hot and Cold Water Mixing Faucet with
Goosneck Spout and Wrist Blade Handles
- Deluxe Hydro-Aspirator with Reverse Flow and
Cold Water Control Valve
- Hand Spray Hose Assembly with Cold Water
Control Valve, Nozzle and 8 feet of hose
- Heavy-Duty Commercial Waste Disposal (1/2
hp) with vacuum breaker and solenoid
- Large Single Compartment Sink
- Vacuum Breaker protection for all plumbing
fixtures to prevent backflow of contaminated water
- Double Cone Down Draft Ventilation Assembly
- Acoustical Coating to reduce metallic noise
and prevent condensation
- Tabletop is sloped toward sink basin for
rapid and positive drainage
[RETURN TO TOP]
MODEL 1036-24 AUTOPSY TABLE
The Model 1036-24 is an economical and
practical table which provides all necessary features to perform routine autopsy or
dissection procedures. It is mounted on four stainless steel legs with adjustable feet.
STANDARD FEATURES:
- Hand Spray
- Waterproof Electrical Outlet - GFCI
- Hydro-Aspirator with Collection Bottle
- Stainless Steel Panel with Master Mixing
Valve
- Large Sink Basin with Lever Handle Drain
- Plumbing and Electrical Lines are factory
installed
- All Stainless Steel Construction
[RETURN TO TOP]
MODEL 1036-215 SMALL ANIMAL NECROPSY
TABLE
STANDARD FEATURES:
- All Type 304 stainless steel construction
with a polished No. 4 Finish
- Size: 60"L x 30"W x 36"H
- Hot and Cold Water Mixing Faucet with
Goosneck Spout and Wrist Blade Handles
- Deluxe Hydro-Aspirator with Reverse Flow and
Cold Water Control Valve
- Hand Spray Hose Assembly with Cold Water
Control Valve, Nozzle and 8 feet of hose (Not shown)
- Heavy-Duty Commercial Waste Disposal (1/2
hp) with vacuum breaker and solenoid
- Large Single Compartment Sink
- Vacuum Breaker protection for all plumbing
fixtures to prevent backflow of contaminated water
- Double Cone Down Draft Ventilation Assembly
- Three Removable Perforated Grid Plates
- Acoustical Coating to reduce metallic noise
and prevent condensation
- Tabletop is sloped toward sink basin for
rapid and positive drainage
[RETURN TO TOP]
Model 1036-245 "T" SHAPED
NECROPSY TABLE W/ HYDRAULIC LIFT
STANDARD FEATURES:
- "T" shaped configuration; head of
"T" is autopsy table with adjustable height; base of "T" is dissecting
table with base cabinet support.
- Table Top: 14 gauge stainless steel, Type
304, heliarc welded, all corners rounded and ground smooth.
1) Autopsy portion: 96 in.L x 32 in.W
2) Dissecting portion: 96 in.L x 24 in. W
Autopsy Table Features:
- Stainless steel channel supports
- Electrically operated scissor lift
1) 2500 pound lift capacity
2) Enclosed in waterproof bellows
3) Lifting heights: 12 in. to 36 in. above
floor
- Flange to engage dissecting table at full
height above floor.
Dissecting Table Features:
1) Type 304 stainless steel
2) Size: 60in. Long x 22in. Deep
- Integral stainless steel sink with integral
trap
1) Size: 48 in. Long x 6 in. Wide x 6 in.
Deep
- Backsplash with built on shelf
- Swing spout faucet with hot and cold wrist
blade controls
- Hydro-aspirator for suction and flushing;
built-in vacuum breaker
- One each serrated gas and compressed air
cocks
- Dual spray hose with control valve
- One GFCI duplex 120VAC/60Hz/single phase
electrical outlet
[RETURN TO TOP]
|
Online
Store
Azusa, California 91702
