Our
Complete Catalog section is now available for download
as a PDF file.
Download
Cadaver Tray Section
MODEL T3603 OR T3604 CARRIER CHASSIS CADAVER TRAY
 The hi-tech plastic operating platform is shaped to fit the
subframe of the carrier chassis. A real time and energy saver, the detachable hi-tech
plastic top will ensure a secure fit with no mechanical fastening devices required. The
top of the platform is formed with ribs for easy drainage. X-rays can also be taken
without the removal of the cadaver from the autopsy table. A re-inforced structure on the
bottom enables easy mobility from rack to chassis through use of a cadaver lift.
Model T3604 has the added benefit of slide
rails provided on the underside of the tray which accept standard x-ray cartridges.
MODEL T3615 STAINLESS STEEL CADAVER TRAY
WITH TROUGH
The stainless steel autopsy platform is
fabricated with a perimeter trough which allows fluid to flow away from the body and down
the sides of the platform toward the drain. You may request a drain plug with attaching
chain which is fastened to the platform to prevent fluid loss in transport or while
racking. The unit is fabricated from 14 gauge, 304 stainless steel with a No. 4 finish.
All exposed welds are ground and polished to match adjoining surfaces.
MODEL T3626 STAINLESS STEEL CADAVER TRAY
Design for use with mortuary refrigerators,
mortuary racks, dissecting tables and cadaver carriers. The Model No. 1036-26 is a
smoothly finished 18 gauge stainless steel body tray. It is an integral part of the Total
Roll System.
STANDARD FEATURES:
- Fabricated with or without hand slots
- Fabricated with or without a drain hole
- All inside corners are smoothly finished for
easy cleaning.
- All edges rolled and welded for extra
strength and easy handling
Custom sizes are available.
[RETURN
TO TOP]
MODEL T3614 STAINLESS STEEL CADAVER TRAY
The stainless steel autopsy platform is
shaped to fit the subframe of all the various chassis manufactured by Mortech. A real time
and energy saver, the detachable stainless steel top will ensure a secure fit with no
mechanical fastening devices required. If is fabricated from 16 gauge, 304 stainless steel
with a No. 4 finish. It featues a depressed pattern allowing fluids to drain easily. A
re-inforced structure on the bottom enables easy mobility by forklift or floor lift.
- Length: 80-1/2 in.
- Width: 32 in.
- Design Load: 500 lbs.
[RETURN
TO TOP]
MODEL T3624 CADAVER STORAGE BOARD
Designed as an economical body storage tray
for use with our Cadaver Storage Systems.
STANDARD FEATURES
- Size: 78" L x 24" W x .75"
Thick
- Laminated on both sides
- Rubber moulding around full perimeter
- For use with storage racks
having support arms spread a maximum of 36"
[RETURN TO TOP]
|
Online
Store
Azusa, California 91702
