Our
Complete Catalog section is now available for download
as a PDF file.
Download
Body Transporter & Removal Cot Section
MODEL 600016 ELEVATED AUTOPSY CARRIER
The Model 600016 Elevated Autopsy Carrier
is designed with an adjustable end which elevates up to 6 inches via a hand crank
mechanism. The cart tops are removable, and interchange with most manufacturers' tops. Our
autopsy carts are manufactured for use in the most extreme conditions, using optimum
design and materials, as described below:
STANDARD FEATURES:
- Cart top is fabricated of 16 gauge Type 304
stainless steel with No. 4 finish. Its dimensions are 32 in. wide by 80 1/2 in. long with
radiused outer corners, a 1-3/4 in. profile with a return flange and a 2 in. ledge around
the entire perimeter. The top is recessed and creased toward the drain hole, All exposed
welds are ground and re-grained to match No. 4 finish.
- Cart frame materials is 1-1/2 in. square 11
gauge wall stainless steel tubing. All welding is continuous with an approximate 1/8 in.
radius bead.
- Four (4) heavy-duty swivel casters all brake
mechanism
- Stainless steel cart-to-sink locking
mechanism locks cart to sink with virtually no cart movement.
- Effortless turning of crank handle raises or
lowers one end of the cart top up to 6 inches.
MODEL 600017 STANDARD CARRIER
The STANDARD CARRIER is our most popular
and economical stainless steel carrier. It is designed for use with our Model T3603 and
Model T3604 Hi-Tech Plastic Cadaver Trays. It is fabricated with a permanent slope of 1.5
inches.
STANDARD FEATURES:
- Fabricated from 1-1/2 inch square, 11 gauge,
304 stainless steel tubing
- Top tray holder fabricated from 1 inch
square, 11 gauge, 304 stainless steel tubing
- Stainless steel has a grained finish and all
welds match adjoining surfaces
- 8 inch casters, all with brake mechanism
- Cart to sink locking mechanism
[RETURN
TO TOP]
MODEL 600015 STANDARD CARRIER
The Model 600015 stainless steel carrier is
designed for use with our stainless steel cadaver trays. It is economically priced yet it
still performs well under heavy-duty use. It is fabricated with a permanent slope of 1.5
inches.
STANDARD FEATURES:
- Fabricated from 1-1/2 inch square, 11 gauge,
304 stainless steel tubing
- Stainless steel has a grained finish and all
welds match adjoining surfaces
- 8 inch casters, all with brake mechanism
- Cart to sink locking mechanism
[RETURN
TO TOP]
MODEL 600038 AUTOPSY CARRIAGE WITH
ROLLERS
The Model 600038 Stainless Steel Autopsy
Carriage with Rollers is designed as an integral part of the Total Roll System for cadaver
handling. It accepts the standard stainless steel body trays used in the Model 86-129
Roller Rack or any of the Mortuary Refrigerators. It can be fabricated simply as a
transfer carrier or it can be sloped for drainage and be used as the actual autopsy
carrier. The use of rollers allows for easy loading and unloading of cadavers. With the
complete Total Roll System, minimal manual cadaver handling is necessary.
STANDARD FEATURES:
- All heavy gauge stainless steel construction
- Heliarc welded seams and joints, polished to
match adjoining surfaces
- Standard design for 23 inch body tray,
please inquire for special order sizes
- 8 inch diameter casters, all with brake
mechanism
- Carrier to sink locking mechanism, if used
as autopsy carrier
- Clamp lock to hold tray in position while in
transport
[RETURN TO TOP]
|
Online
Store
Azusa, California 91702
